亲子乐园空调送风方式的数值模拟研究

大型综合室内亲子乐园属于高大空间,设有游乐设施和游戏的特殊性使得对空间的舒适性要求一致,但是送风气流遇阻严重,室内存在较多气流死角,影响室内空气质量和儿童健康。因此其空调设计不仅需要考虑温度、风速的空间均匀度,还要考虑各点的空气龄和PMV-PPD指标。以天津某亲子乐园为研究对象,利用scSTREAM软件对适用于该房间的辐射供冷加新风、置换通风、混合通风三种空调方式的送风效果进行数值模拟分析,从流场的均匀性、人员的热舒适性等方面对模拟结果进行探讨,研究结果表明辐射供冷加新风方式的空间均匀性和PMV指标最佳,混合通风方式的空气龄最小。     

一种新型回路电阻测试仪的研究与设计

针对传统低压回路电阻测试仪只能在被测设备停电时使用的一大限制,本文提出并设计了一种新型低压回路电阻测试仪。该仪器可在低压设备运行状态下对其回路电阻进行测量,在保证测量精度的前提下减少了设备停电率,大大提高了工作效率。     

附加外场力对锌锅表层锌液流动和锌渣分布的影响

实测了热镀锌锌锅表层锌液的流速,并分析了锌锅浮渣的分布特点,提出了一种在锌锅锌液上方主动加载外场力作用以驱动锌液流动进而改变锌渣分布的新方法,称为锌渣流动管理方法(DFMS-Dross Flowing Management System)。通过源力加载的方式修正了流体动量守恒方程,建立了锌液流场数值计算模型,模拟了不同外场力加载布局下锌锅表层锌液的流场。结果表明,附加外场力作用可有效促进锌锅表层锌液的切向流动,最大切向流速可达0.8 m/s;表层锌液的切向流动可拖动锌渣跟随流动,进而改变锌渣分布,促进锌锅排渣,证实了DFMS的有效性。模拟结果还表明,锌锅表层锌液的切向流速受外场力加载时间的影响较小,而随加载外场力的增大而增大,但加载外场力的大小对100~200 mm深锌液的流速影响较小。最后,通过定义锌锅表层锌液的排渣时间因子讨论了不同外场力加载方式的排渣效率。     

探伤加速器可调准直器的设计

本文基于6 MeV探伤加速器设计了照射野可调准直器，其主要由4个具有2自由度的准直块首尾交错布置而成，准直块采用厚43 mm的钨镍铁对无用X射线进行屏蔽。通过控制准直块纵向和横向驱动电机实现准直器开口自动调节，从而实现X射线照射野的自动调节，以满足工业探伤和工业CT对X射线源不同照射野的需求。准直块采用交错式设计实现了准直块排布在同一平面，使准直器结构紧凑，并有效减小了X射线的漏射。     

基于matlab的电磁场仿真与分析

电磁场问题往往较为抽象，并且计算也相对比较复杂。为此，借助计算机软件对复杂问题进行求解的重要性也得到凸显。本文通过两个例子，着重介绍了matlab在电磁场仿真与数值分析中的应用。结果表明这一方法具有计算效率高，能使抽象的场的问题具体化的优点。     

Ultrasonic tomographic velocimeter for visualization of axial flow fields in pipes

An ultrasonic tomographic velocimeter to provide quantitative images of axial flow fields in pipes is developed and presented in this work. To detect the flow in various directions and positions, a novel transducer configuration strategy is proposed. All-in-one transducers are mounted in two sectional planes of the pipe. In each plane, N transducers are equally spaced along the circumference. Overlapped propagation paths are introduced by the configuration strategy, and the influence of the vortex flow can be eliminated theoretically by averaging the line velocities of the overlapped paths. To achieve a fast detection speed, the projection data is collected via an electrical scan in a fan-beam mode. After rearrangement and interpolation of the projection data, the parallel beam filtered back projection (FBP) algorithm is implemented to reconstruct the axial flow field. Numerical simulations with the theoretical velocity profiles were performed. The compensation method for the vortex flow is proved to be effective and necessary, and the number of transducers required for reconstruction of common flow profiles was estimated. Accordingly, an ultrasonic tomographic velocimeter consisting of 2×12 transducers was fabricated. Experiments were conducted in the straight pipe and downstream of a single bend pipe and compared with the computational fluid dynamics (CFD) simulation results. As demonstrated, the ultrasonic tomographic velocimeter was capable of visualizing both symmetric and asymmetric axial flow fields with high reliability.     

THE effect of Srandom DOPANT fluctuation on threshold voltage and drain current variation in junctionless nanotransistors

We investigate the effect of dopant random fluctuation on threshold voltage and drain current variation in a two-gate nanoscale transistor. We used a quantum-corrected technology computer aided design simulation to run the simulation (10000 randomizations). With this simulation, we could study the effects of varying the dimensions (length and width), and thicknesses of oxide and dopant factors of a transistor on the threshold voltage and drain current in subthreshold region (off) and overthreshold (on). It was found that in the subthreshold region the variability of the drain current and threshold voltage is relatively fixed while in the overthreshold region the variability of the threshold voltage and drain current decreases remarkably, despite the slight reduction of gate voltage diffusion (compared with that of the subthreshold). These results have been interpreted by using previously reported models for threshold current variability, load displacement, and simple analytical calculations. Scaling analysis shows that the variability of the characteristics of this semiconductor increases as the effects of the short channel increases. Therefore, with a slight increase of length and a reduction of width, oxide thickness, and dopant factor, we could correct the effect of the short channel.     

A modified cross-correlation algorithm for PIV image processing of particle-fluid two-phase flow

PIV (Particle Image Velocimetry) technique for flow field measurement has achieved popular self-identify through over ten years development, and its application range is becoming wider and wider. PIV post-processing techniques have a great influence on the success of particle-fluid two-phase flow field measurement and thus become a hot and difficult topic. In the present study, a Phase Respective Identification Algorithm (PRIA) is introduced to separate low-density solid particles or bubbles and high-density tracer particles from the PIV image of particle-fluid two-phase flow. PTV (Particle Tracking Velocimetry) technique is employed to calculate the velocity fields of low-density solid particles or bubbles. For the velocity fields of high-density solid particles or bubble phase and continuous phase traced by high-density smaller particles, based on the thought of wavelet transform and multi-resolution analysis and the theory of cross-correlation of image, a delaminated processing algorithm (MCCWM) is presented to conquer the limitation of conventional Fourier transform. The algorithm is firstly testified on synthetic two-phase flows, such as uniform steady flow, shearing flow and rotating flow, and the computational results from the simulated particle images are in reasonable agreement with the given simulated data. The algorithm is then applied to images of actual bubble-liquid two-phase flow and jet flow, and the results also confirmed that the algorithm proposed in the present study has good performance and reliability for post-processing PIV images of particle-fluid two-phase flow.     

田赛距离测量中全站仪的设计与实现

本文提出了将智能全站仪这种精密测量仪器广泛应用于田赛项目测量中，并结合其他科技元素用于解决田赛项目中跳远、投掷等项目的测量及数据管理问题，实现实时、自动、准确地裁定和报告比赛成绩。     

Characterisation of crack-tip fields in biaxial fatigue based on high-magnification image correlation and electro-spray technique

This work presents a novel methodology for characterising fatigue cracks under biaxial conditions on a low carbon steel. It allows both short crack and early propagation stages to be studied in tubular specimens. Short crack growth is studied with a long-distance microscope acquiring images of the bare metal surface. Results showed oscillations in crack growth rate due to microstructure. Early propagation stage is studied with high magnification Digital Image Correlation (DIC) technique for measuring displacement and strain crack-tip fields. By applying micro-speckle pattern on the metal surface it is possible to achieve high magnification for DIC technique. Ultra-fine black and white speckles were created by electro-spray technique. The validity of this novel technique is demonstrated by direct comparison with extensometer measurements, under combined tension–compression and torsion conditions. It was also possible to estimate satisfactorily the mixed-mode stress intensity factor.